PAW2422

King Heaters

King Electrical PAW Wall Heater, 7679 Btu, 240 V, 2.1 - 9.4 A, 2250 W

PAW2422

King Heaters

King Electrical PAW Wall Heater, 7679 Btu, 240 V, 2.1 - 9.4 A, 2250 W

  • NCE Part No: 221012
  • MPN: PAW2422
  • UPC: 09331916300

Retail Price:

Per
  • Min. Order Qty: 1
  • Qty:

Rate this Product!

DESCRIPTION

King’s exclusive Pic-A-Watt steel fin element allows customers to select from a range of wattage options, tailoring the heater to an area’s specific heating requirements. Perfect for large living areas yet whisper quiet enough for bedrooms. The premium combination of an efficient high-mass steel element and whisper quiet squirrel cage blower, offers top of the class performance and years of trouble-free operation. PAW comes with five year warranty and 20+ year history of reliability. For best results use with an electronic line voltage wall thermostat. Also available with a built-in thermostat. The wall can shall be 20 gauge electro-galvanized steel and contain knockouts through which power leads are brought. The wall can shall be able to mount directly to wall studs in new or existing construction. The wall can shall be provided with QuickSet™ stud alignment tabs, used for maintaining proper depth during new installation. The wall can shall be supplied with a factory installed ground wire. Clearance: 6 in to a side all, 4 in from floor minimum

king Wall Heater, Series: PAW, 7679 Btu, 240 V, 2.1 - 9.4 A, 2250 W, Wall Mount, Steel, Bright White, Epoxy Powder Coated

SPECIFICATIONS

special features      :      C-frame motor; Squirrel cage blower; Whisper quiet; Multiple wattage element; 20 gauge powder-coated grille with contemporary die-formed round corners; Bi-metallic limit; Safety thermal cutout trips and turns off heater; A tangential cylindrical blower, delivering 65 CFM, shall be driven by a shaded pole, permanently lubricated, C-frame type motor with impedance protection and sealed bearings; Motors shall be the same voltage as the heater; Element assemblies shall be a non-glowing design. Element assemblies shall consist of three steel sheathed heating tubes in a furnace-brazed, plate-finned, block design; Each sheathed tube shall contain coiled Ni-Chrome wire embedded in an insulator of magnesium oxide; The element assembly shall provide a minimum of seven (7) possible wattage configurations available for selection during field installation; The use of external
Brand Name      :      King
Sub Brand      :      PIC-A-WATT
Type      :      Wall Heater
Application      :      For Room Heating
Standard      :      C/US UL E41422, ETL Listed, CSA Certified
Material      :      Steel
Phase      :      1
Voltage Rating      :      240 V
Wattage      :      500/750/1000/1250/1500/1750/2250 WTT
Housing Material      :      20 Gauge Electrogalvanized Steel
Mounting      :      Wall
Dimensions      :      13-1/2 IN Width X 4-1/2 IN Depth X 7-1/2 IN Height
Model      :      PAW2422

FEATURES

  • A whisper quiet squirrel cage design tangential blower, delivering 75 cfm, shall be driven by a shaded pole, permanently lubricated, C-frame type motor with impedance protection and sealed bearings, motors shall be the same voltage as the heater
  • Heaters shall be equipped with thermal overload Smart Limit Protection, which disconnects elements and motor in the event of normal operating temperatures are exceeded, if thermal overload trips due to abnormal operating temperatures, thermal overload shall remain open until manually reset by turning the heater off
  • Grill shall be a louvered, one-piece design with rounded edges on all four sides, with rounded corners to prevent snags from contact with other materials
  • Wall can shall be 20 gauge electro-galvanized steel and shall contain a minimum of three (3) knockouts, wall can shall have a depth gauge indicator and a factory installed, insulated and stranded copper ground-wire
  • Pic-A-Watt element assemblies shall consist of three steel sheathed heating tubes in a furnace-brazed, plate-finned, block design, each sheathed tube shall contain coiled Ni-Chrome wire embedded in an insulator of Magnesium Oxide, element assembly shall provide up to 7 possible wattage configurations available for selection during field installation, Use of external resistors, diodes, or other weak links to obtain multiple wattages will not be acceptable
  • 500, 750, 1000, 1250, 1500, 1750, 2250 W power rating
  • Minimum of 4 in clearance to floors and 6 in sidewalls, zero clearance to combustibles in the wall
  • 20 gauge powder coated grille with contemporary die-formed round corners
  • 7-1/2 in H x 13-1/2 in W x D Grille
  • 7-1/2 in H x 12-1/2 in W
  • Steel grille

GUIDES & MANUALS

View All Branch Availability

Branch Name Available

Write Review

Atleast 50 Characters. You can Express Upto 1000 Characters

Need Assistance? We Can Help!

advertisingBanner

Sign up for the latest NCE news

Connect with NCE

Log InSign Up

Forgot Your Password?

loading
loading

Update Email Address


An Email Id is required to process your orders. Please enter your email id and click update.


Sign up for the latest NCE news